SLS bearing

•Needle roller bearings

Drawn Cup Needle Roller Bearing

Heavy Duty Needle Roller Bearing

Needle Retainer Assembly

Thrust Needle & Retainer Assembly

Linear Ball Bearing

Yoke Type Track Roller

Cylindrical Roller Bearing

Water Pump bearing

Auto Motor and Steering Bearing

Auto A/C Compressor Bearing

Clutch Release Bearing

Drawn cup needle clutch

•Bushings

SF-1 Series Bushing

SF-1 Series Bushing Lead Free

SF-2 Series Bushing

Bimetal Bushing

Copper Alloy Buried Solid Lubricating Bushes

Cast Iron With Graphite Oilless Bearings

Hard Steel With Special Treatment Slide Bearings

Retainer Ball Bearing

• PRODUCT >> Curve Roller

	Introduction
Curve roller is composed of a stud used as the tray of a group of rollers and a thick wall outer ring.The shoulder of the stud and the surface retaining ring on the stud form the guiding faces on the two sides of the outer ring . When the curve rollers are running on the plain tray or cam wheel, the inner stress on the rollers will increase due to the deformation of the outer ring.Therefore the rated load should be selected as curve roller column in this operational case.

Structure

KR		Curve rollers radically guided by the retaining edge and ring
KR...PP		Curve rollers with sealing ring
KRE		Curve rollers with eccentric sleeve
KRE...PP		Curve rollers with eccentric sleeve and retaining sleeve
KRV		Curve rollers radically guided by the retaining edge and ring, full complement needle roller type
KRV...PP		Curve rollers with sealing ring
KRVE		Curve rollers with eccentric sleeve
KRVE...PP		Curve rollers with eccentric sleeve and retaining sleeve
NUKR		Curve rollers axile guided by rolling bodies, full roller type
NUKRE		Curve rollers with eccentric sleeve
CR		Inch series curve rollers

Explanation for curve roller ...

INQUIRY BACK